Aluminum Fence Installation in Barrie
We install durable, low-maintenance aluminum fencing that looks sharp and lasts for decades without the rust.
Why Aluminum Fencing Works for Barrie Properties
Aluminum doesn't rust. That's the big one. You're not repainting every few years or dealing with corrosion from snow, salt, and freeze-thaw cycles. It's powder-coated at the factory, so the finish holds up through Barrie winters without flaking or peeling. You get the look of wrought iron without the maintenance headaches.
We install aluminum fences around pools, front yards, commercial properties, anywhere you want a clean look that doesn't demand constant attention. It's lighter than steel, so gates swing easily and posts don't need massive footings. But it's still strong enough to handle wind, snow load, and the occasional hockey puck. If you're comparing materials, check out our Vinyl Fence Installation page too, but aluminum wins when you want that ornamental metal look.
Barrie's building codes are strict about pool enclosures. Aluminum meets those requirements out of the box. We know the specs, we pull the permits, and we make sure your fence passes inspection the first time. We also work in Innisfil and Springwater, so if you're just outside city limits, we've got you covered.
What You Get with Our Aluminum Fence Installation
We start with a site visit. We'll measure, talk about style options (flat-top, spear-top, arched), and walk you through gate placement. You'll get a written quote the same day or next. No surprises, no upselling. If your yard has slopes or tricky corners, we'll show you how we'll handle it before we dig the first post hole.
Installation usually takes one to three days depending on the run. We set posts in concrete, level every section, and make sure gates latch smoothly. Aluminum doesn't warp or sag like wood can, so once it's in, it stays straight. We clean up completely when we're done. You won't find leftover concrete chunks or packaging in your flower beds. If you need a repair down the road instead of a full install, we do that too - see our Fence Repair service.
Aluminum Fence Styles and Customization
Most of our clients go with black or bronze powder coat, but we can order white, green, or custom colors if you want something specific. Heights range from three feet for a decorative garden border up to six feet for privacy or security. Spear-top pickets are popular for front yards. Flat-top or puppy picket (closer spacing at the bottom) works well for backyards with dogs.
Gates are a big part of the project. We install single walk gates, double drive gates, self-closing hinges for pool code, and magnetic latches that actually work in cold weather. If you want an automatic opener for a driveway gate, we can rough in the posts and hardware, but you'll need a gate automation specialist for the motor and controls. We stick to what we do best - solid fence and gate installation.
How Aluminum Compares to Other Fence Materials
Aluminum costs more up front than Chain Link Fence Installation, but it looks a lot better and you're not replacing it in fifteen years. It's usually less than premium Wood Fence Installation like cedar, and you'll never stain or seal it. Vinyl is another low-maintenance option, but aluminum handles impacts better and doesn't get brittle in extreme cold.
If you're fencing a pool, aluminum is often the easiest path to code compliance. It doesn't have horizontal rails kids can climb, and the spacing between pickets meets safety standards without custom work. For commercial properties in Barrie, aluminum gives you a professional look that holds up to high traffic and weather without constant repairs.
Service Areas and Getting Started
We're based in Barrie and we cover the surrounding area including Angus, Midhurst, and other nearby communities. If you're not sure whether we service your street, just call. We'll tell you straight up.
Getting a quote is simple. Call us or fill out the contact form. We'll set up a time to walk your property, talk through what you need, and give you a price. Most aluminum fence projects fall between $2,500 and $6,000 for a typical residential yard, but we'll give you an exact number based on your layout and style. We're Dave King Fencing, and we've been installing fences in Barrie long enough to know what works and what doesn't.
Aluminum Fence Installation pricing
Aluminum Fence Installation pricing in Barrie typically falls into the ranges below. We'll send a firm quote after a quick conversation about scope.
Small repair or gate ($200 - $800): $200 - $800Partial fence or section replacement ($800 - $2,500): $800 - $2,500Standard residential fence ($2,500 - $6,000): $2,500 - $6,000Large property or premium materials ($6,000 - $15,000): $6,000 - $15,000Commercial or extensive projects ($15,000+): $15,000+
Where we serve
We serve aluminum fence installation across Barrie and the surrounding neighborhoods listed below.
Innisfil, Springwater, Oro-Medonte, Angus, Midhurst, Stroud, Cookstown, Craighurst, Elmvale, and Alcona.
Related services
Looking for something else? We also offer:
Wood Fence Installation, Vinyl Fence Installation, Chain Link Fence Installation, and Fence Repair.
Frequently asked questions
How long does an aluminum fence last in Barrie's climate?
Thirty years or more, easily. The powder coating protects the aluminum from oxidation, so you won't see rust or corrosion even with road salt and freeze-thaw cycles. We've seen aluminum fences from the '90s that still look good. As long as nothing physically damages it, it'll outlast most other fence materials.
Can I install an aluminum fence myself or should I hire you?
You can DIY it if you're handy and have the tools, but setting posts level and plumb in concrete isn't as easy as it looks, especially on sloped or rocky ground. Gates are the tricky part - if the frame isn't square and the posts aren't perfectly spaced, you'll fight with latches forever. We do this every day, so we're faster and the result is cleaner. Plus, if it's a pool fence, you need permits and inspections, and most inspectors want to see a contractor's work.
Does aluminum fencing require any maintenance?
Almost none. Hose it down once a year if it gets dusty or covered in pollen. Check gate hinges and latches occasionally to make sure they're tight. That's it. You don't paint, stain, seal, or rust-proof anything. If a section gets damaged - say a tree branch falls on it - we can usually replace just that panel without redoing the whole fence.